2" Chromed Zinc Alloy Medical Clasp Buckle For Patient Transfer Belt
Steel, Zinc Alloy
Plastic bag with PE Foam, or as per customer’s requirements.
ISO factory, ROHS, CE Certificate
For medical use strap
The medical clasp buckle is good for making transfer belt. Transfer belts are used to help moving patient after surgery. Flyway’s medical clasp buckles are sold very well with the best quality. Design and color can be customized.
Current buckle size: 2 1/2” x 2 1/4” x 1/2” (65mm x 56mm x 13mm)
Weight: 1.2 Lbs (54.5g)
Aesthetics for hardware products themselves
1.Foreign material/bright speck: D<0.5,S<0.3,acceptable number is 3pcs at front face, 5pcs for side face,7pcs for back and bottom face;0.5 <D<0.6,0.3<S<0.5 1pc at front face, 2pcs for side face,3pcs for back and bottom face; 0.6 <D<1.0,0.5<S<0.8, 0pc at front face, 1pc for side face,2pcs for back and bottom face
2.Hard scratch mark, handing mark: D<0.4, acceptable number is 1pc at front face, 2pcs for side face,3pcs for back and bottom face; 0.4 <D<1.0, 0pc at front face, 1pc for side face,2pcs for back and bottom face; 0<L<2.0,w<0.3, 0pc at front face, 0pc for side face,1pc for back and bottom face
3.Soft scratch mark: L<4,w<0.3,acceptable number is 3pcs at front face, 5pcs for side face,7pcs for back and bottom face; 4<L<8.0.2<w<0.3, 2pcs at front face, 3pcs for side face,5pcs for back and bottom face; 8<L<10.W<0.3, 1pc at front face, 2pcs for side face,2pcs for back and bottom face
4.Burrs: L<0.2mm,no obvious hand feel and no effecting assembly.
5.Oversized R angle: refer to project drawing and limited sample R
6.Crop irregularity: refer to limited sample
7.Dimensional deviation: refer to project drawing
8.Deformation: refer to confirmed component samples
9.Color deviation: ΔE<1 or refer to limited sample
10.Insufficient chamfer: no allowance.
Aesthetics for spraying hardware products
3.Soft scratch mark: 4<L<8.0.2<w<0.3, 1pc at front face, 2pcs for side face,3pcs for back and bottom face; 8<L<10.W<0.3, 0pc at front face, 1pc for side face,2pcs for back and bottom face
4.pile paint: no allowance
5.Shrinkage: refer to limited sample
6.flying paint: L<0.3mm or refer to limited sample
7.Stripping: no allowance
8.Color deviation: ΔE<1 or refer to limited sample
9.Glossiness: refer to limited sample
10.Handprint, exposed base, shadow: no allowance
Aesthetics for electro plated products
No scratch mark, bubbles, drop, hard spot, broken filament, fisheye, blur, rust mark ,deckle edge ,deformation, breakage, poor treating, poor molding, water wave mark on electroplated surface
Measure important dimensions of products per approved samples, purchase order etc, the result can’t be beyond the tolerance
Assemble each accessory, complying with assembly requirements of finished products, no poor assembly.
No sharp point, sharp edge, scraping etc.
The product function is identical to customer’s specified function.
After test, removal area not more than 10%, for hardware plating parts, the peeling of plating layer should <5% after adhesion test;
Salt Spray Test
For hardware plating parts, have to do the salt spray test of 24H. and surface don`t allow to have rust after test.
1.Don’t accept single corrugated box;
2.No metal needle, sharp point or edge
3.Clear and correct shipping mark, organized sealed box.
4.After the standard dropping testing, no damage of products and box, no dislocation inside.
If you are interested in our 2"50mm nickle plated metal and zinc alloy giant medical clasp buckle for patient webbing transfer belt, welcome to buy our high quality products. Known as one of the leading China metal products manufacturers and suppliers, we can assure you of its high precision. And the customized service is also supported. Check the quotation now.